Abstract The possibility of recycling solid wastes in the production of geopolymers and advanced ceramic products has received special attention recently. This work investigated the feasibility of replacing a high amount (70-90 wt%) of metakaolin with roof tile waste (CW) in the production of Na-geopolymer composites. Additionally, the influence of this alternative material, in the phase transformations and properties evolution (elastic modulus, compressive strength, porosity, density, and linear shrinkage) of the prepared compositions after distinct thermal treatments (40-1000 °C) was evaluated. The results showed that the incorporation of CW powder into the geopolymeric compositions enhanced their thermal and mechanical properties up to 1000 °C. The best performance was reached when using 80 wt% of the selected waste, which led to ceramic specimens with high crystallinity (presenting quartz, hematite, and albite phases), compressive strength (39.6 MPa), suitable linear shrinkage (-7.4%), and improved thermal stability (without visual cracks) after firing at 1000 °C.

Bone formation around a metallic implant is a complex process that involves micro- and nanometric interactions. Several surface treatments, including coatings were developed in order to obtain faster osseointegration. To understand the role of these surface treatments on bone formation it is necessary to choose adequate characterization techniques. Among them, we have selected electron microscopy, profilometry, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) to describe them briefly. Examples of the potentialities of these techniques on the characterization of titanium for biomedical applications were also presented and discussed. Unfortunately more than one technique is usually necessary to describe conveniently the topography (scanning electron microsocopy, profilometry and/or AFM) and the chemical state (XPS) of the external layer of the material surface. The employment of the techniques above described can be useful especially for the development of new materials or products.